Optio Series

Optio XP

Conspec's NEW industrial gas detector featuring MIR infrared sensor technology incorporates moisture protection/compensation and provides a solution for harsh environments where other monitors fail, thus increasing productivity and reducing downtime.

More Information

Optio XP Data Sheet

Photos / Media

Optio G - Multi Gas

The Optio G Multi Gas Monitor has been designed and tested to ensure simple installation, calibration, and maintenance. The innovative design of the Optio G Multi Gas Monitor combines gas and atmospheric monitoring, I/O support and a wide array of power and communications options to create an all-in-one solution which greatly reduces upfront costs by eliminating the need for multiple devices.

More Information

Optio G - Multi Gas Data Sheet
Pennsylvania DEP Certification
MSHA Certification
MSHA Certification

Photos / Media

Optio G - Dual Gas

Conspec's NEW Optio G Dual Gas Monitor featuring multi sensor support, enhanced alarming capabilities, and multiple I/O options provide solutions that can withstand the harshest environmental and operational conditions. The Optio G Dual Gas Monitor has been designed and tested to ensure simple installation, calibration, and maintenance. The innovative design of the Optio G Dual Gas Monitor combines gas and atmospheric monitoring, I/O support and a wide array of power and communications options to create an all-in-one solution which greatly reduces upfront costs by eliminating the need for multiple devices.

More Information

Optio G - Dual Gas Data Sheet
MSHA Certification
MSHA Certification

Photos / Media

Optio V

The OPTIO V is a stand-alone, microprocessor based multi-gas detector in a Nema 4X enclosure and designed for ventilation control in enclosed parking spaces such as parking garages, vehicle maintenance facilities, warehouses, etc. Dry contact relays with programmable alarm points are provided for fan control and can be used in conjunction with external relays for louver/damper control. Modbus communications can be used for monitoring with a building automation system (BAS) and two (2) 4-20mA outputs can be used to send a signal to variable frequency drive (VFD) controlled fans.

More Information

Optio V Data Sheet
Nemko Certification

Photos / Media

Optio IS - Multi Gas

The Optio IS Multi Gas Monitor has been designed and tested to ensure simple installation, calibration, and maintenance. The innovative design of the Optio IS Multi Gas Monitor combines gas and atmospheric monitoring, I/O support and a wide array of power and communications options to create an all-in-one solution which greatly reduces upfront costs by eliminating the need for multiple devices. Because of the Optio IS Multi Gas Monitor's pending ETL-US, C-ETL, IECEx and ATEX approvals, it will quickly become the gold standard for coal & hard rock mining, and oil & gas well pad operations to ensure protection of their personnel, assets, and productivity.

More Information

Optio IS - Multi Gas Data Sheet

Photos / Media

Optio IS - Single/Dual Gas

The Optio IS Dual Gas Monitor has been designed and tested to ensure simple installation, calibration, and maintenance. The innovative design of the Optio IS Dual Gas Monitor combines gas and atmospheric monitoring, I/O support and a wide array of power and communications options to create an all-in-one solution which greatly reduces upfront costs by eliminating the need for multiple devices. Because of the Optio IS Dual Gas Monitor's pending ETL-US, C-ETL, IECEx and ATEX approvals, it will quickly become the gold standard for coal & hard rock mining, and oil & gas well pad operations to ensure protection of their personnel, assets, and productivity.

More Information

Optio IS - Single/Dual Gas Data Sheet

Photos / Media

Optio Wireless - Leaky Feeder

Conspec's Wireless Industrial Gas Monitors and Gateways can operate seamlessly as Modbus devices over VHF Leaky Feeder systems. The Gateway is wired to a SCADA system and connected to the Head-End using BNC connectors. Each Gateway can communicate with up to 32 wireless monitors and maximum of 247 Wireless Monitors can be used.

More Information

Optio Wireless - Leaky Feeder Data Sheet

Photos / Media

Optio AVM

Conspec's NEW Optio Air Velocity Monitor featuring a modified pilot tube using differential pressure technology has been designed to provide the maximum of accuracy and responsiveness while withstanding the harshest environmental and operational conditions. Our Air Velocity Monitors are optimized to provide stable readings in the presence of moving vehicles disrupting air velocity readings. Where other monitors often fail, the Optio AVM flourishes, providing a stable, reliable air velocity reading.

More Information

Optio AVM Data Sheet

Photos / Media

Optio AQS

Conspec's NEW Optio Air Quality Station featuring multi sensor support, enhanced alarming capabilities, multiple I/O options provide solutions that can withstand the harshest environmental and operational conditions. The innovative design of the Optio AQS combines air quality related data such as Barometric Pressure, Relative Humidity, Air Velocity, Wet Bulb Temperature, Dry Bulb Temperature, CO, O2, CO2, CH4, etc., and a wide array of power and communications options to create an all-in-one solution.

More Information

Optio AQS Data Sheet

Photos / Media

Optio GM

Conspec's NEW Optio Ground Motion Monitor is a joint effort between Mine Design Technologies and Conspec Controls to the Optio Monitor and the MDT MPBX (Multi-Point Borehole eXtensometer).

More Information

Optio GM Data Sheet

Photos / Media

Optio PM

The Optio Particulate Matter (PM) sensor is a technological breakthrough in optical PM sensors. Its measurement principle is based on laser scattering and makes use of Conspec's innovative contamination- resistance technology. This technology, together with high-quality and long-lasting components, enables precise measurements from its first operation and throughout its lifetime of more than ten years.

More Information

Optio PM Data Sheet

Photos / Media

Optio I/O

With its wide array of input gas sensors, air flow sensors temperature/pressure/humidity sensors, integrated field device sensors or third-party remote sensors, such as water level, flow or motion sensor, analog and digital input/output relay ports, the Optio Fan Controller can be configured to take local action based on sensor alarm levels and autonomously turn on/off I/O or set a given value without the need for an external front-end system.

More Information

Optio I/O Data Sheet

Photos / Media

Optio I/O - Stench Gas Release

The Conspec Optio I/O Controller is a simple easy to use I/O controller designed to give the user the ability to monitor and control a range of field devices either locally or remotely via Modbus, making it the the perfect solution for stench gas release applications.

More Information

Optio I/O - Stench Gas Release Data Sheet

Photos / Media

Optio S

Conspec's NEW Optio S Monitor is a lightweight budget monitor designed to withstand the harshest environmental and operational conditions. Where other monitors often fail, the Optio S Monitor flourishes, reducing downtime and increasing productivity, without compromising safety.

More Information

Optio S Data Sheet

Photos / Media

Optio G Diesel Discriminator

Conspec's NEW Optio G Diesel Discriminator is a multi-gas monitor specifically designed to filter out nuisance Carbon Monoxide Sensor alarms that may occur in a mining environment due to passing diesel equipment, particularly from the cross-sensitivity of NO and NO2 that is normally picked up by a typical Carbon Monoxide Sensor. The result provides real-time Carbon Monoxide, Nitric Oxide and Nitrogen Dioxide readings as measured by the sensors, and a Corrected Carbon Monoxide Reading to provide the actual Carbon Monoxide measurement at the point of monitoring.

More Information

Optio G Diesel Discriminator Data Sheet

Photos / Media

Optio IS Diesel Discriminator

Conspec's NEW Optio IS Diesel Discriminator is a multi-gas monitor specifically designed to filter out nuisance Carbon Monoxide Sensor alarms that may occur in a mining environment due to passing diesel equipment, particularly from the cross-sensitivity of NO and NO2 that is normally picked up by a typical Carbon Monoxide Sensor. Because the Optio IS Diesel Discriminator is built on Conspec's Optio IS platform, up to three additional sensors can be installed at the desired location, whether for monitoring of other gases or atmospheric conditions, such as air velocity, wet and dry bulb temperature, humidity and barometric pressure, among others, thus greatly reducing up front costs by eliminating the need for multiple devices at the chosen monitoring location.

More Information

Optio IS Diesel Discriminator Data Sheet

Photos / Media

Optio I

The OPTIO I is a stand-alone, microprocessor based multi-gas detector and designed for indoor general purpose areas where there are concerns of toxic gas leaks, bi-product process gases, and oxygen  displacement. With optional enclosures the Optio I Transmitter head can handle up to 6 integral or remote sensors (3 NDIR and 3 Electrochemical).

More Information

Optio I Data Sheet

Photos / Media

Product Inquiries


©2024 Conspec®. Website by
 Thinkr Marketing
©2024 Conspec®.
bookearthmagnifiercrossmenuchevron-down